Continuing as the leader in the industry, Perry is proud to introduce the SIGMA 40 monoplace hyperbaric chamber to its line of innovative products. This system has a 40.5” Internal Diameter chamber, the largest in the industry, which significantly reduces the incidence of noncompliance due to claustrophobia as well as allowing the treatment of the bariatric population. While the internal diameter has increased, the new technology used to build the Sigma 40 has enabled Perry to decrease the weight of the chamber by 1,650 lbs. resulting in fewer limitations due to weight restrictions.
The SIGMA 40 hyperbaric chamber system features:
Building Service Requirements
The following requirements must be met for proper operation of the SIGMA 40 Monoplace Hyperbaric System.
SIGMA 40 hyperbaric chamber system Technical Specifications:
|Width||46 in. / 1.168 meter|
|Length||105 in. / 2.667 meter|
|Height||68.75 in. / 1.746 meter|
|Internal Diameter||40.5 in. / 1.029 meter|
|Internal Length||93 in. / 2.362 meter|
|Internal Volume||69.3 cu. Ft. / 1.962 cu. meter|
|Weight||2850 lbs. / 1293 Kg|
|Maximum Operating Pressure||30 psi / 3 ATA (2.07 bar)|
|Design Temperature||32 F to 100 F / 0 C to 38 C|
|Oxygen Supply Pressure||50 to 90 psi / 3.45 to 6.2 bar|
|Oxygen Supply (Peak) Flow||40 scfm / 1130 lpm|
|Ventilation Rate||4.4 to 13.6 scfm / 125 to 385 lpm|
|Pressure Change Rate||1 to 5 psi/min / .07 to .34 Bar/min|
|Emergency Depressurization Rate||3ATA to 1ATA in 120 sec|
Gurney Adjustments 15°, 35°, 45°, 55°, 57½°
All Perry systems meet or exceed current requirements of ASME, PVHO-1, NFPA-99 Chapter 20, 21 Code of Federal Regulations, Chapter 1, Part 820 and are registered with the National Board of Boiler and Pressure Vessel Inspectors.