For over 20 years Perry Baromedical has held the honor of manufacturing the largest monoplace hyperbaric chamber in the industry, with the introduction of the SIGMA 36, Perry holds the added distinction of manufacturing the two largest monoplace hyperbaric therapy systems.
The larger chamber sizes provide the patient with a more pleasant treatment experience. Confinement anxiety and other complications will be reduced if treatment is performed in the larger, more patient-friendly chambers.
The SIGMA 36 hyperbaric chamber system features:
Building Service Requirements
The following requirements must be met for proper operation of the SIGMA 36 Monoplace Hyperbaric System.
SIGMA 36 hyperbaric chamber system Technical Specifications:
|Width||42 in. / 1.067 meter|
|Length||105 in. / 2.667 meter|
|Height||64 in. / 1.625 meter|
|Internal Diameter||36 in. / 0.912 meter|
|Internal Length||93 in. / 2.36 meter|
|Internal Volume||54.8 cu. Ft. / 1.50 cu. meter|
|Weight||2400 lbs. / 1088 Kg|
|Maximum Operating Pressure||30 psi / 3 ATA (2.07 bar)|
|Design Temperature||32 F to 100 F / 0 C to 38 C|
|Oxygen Supply Pressure||50 to 90 psi / 3.45 to 6.2 bar|
|Oxygen Supply (Peak) Flow||30 scfm / 850 lpm|
|Ventilation Rate||4.4 to 13.6 scfm / 125 to 385 lpm|
|Pressure Change Rate||1 to 5 psi/min / .07 to .34 Bar/min|
|Emergency Depressurization Rate||3ATA to 1ATA in 100 sec|
Gurney Adjustments 15°, 35°, 45°, 55°, 57½°
All Perry systems meet or exceed current requirements of ASME, PVHO-1, NFPA-99 Chapter 20, 21 Code of Federal Regulations, Chapter 1, Part 820 and are registered with the National Board of Boiler and Pressure Vessel Inspectors.